Special Air Compressor For Low Pressure Conveying Industry Introduction

 Special Air Compressor For Low Pressure Conveying Industry Introduction

​

Air compressors dedicated to the low-pressure conveying industry are mainly used to provide compressed air for low-pressure conveying systems, with the following characteristics:



Low pressure compression: The air compressor uses a low pressure design to compress the air into the required low pressure range to meet the needs of low pressure conveying systems.


High efficiency: The air compressor dedicated to the low-pressure conveying industry has a high compression efficiency, which can quickly compress the air to the required pressure and improve production efficiency.


Reliable and stable: The air compressor adopts advanced technology and materials, has reliable stability and long service life, and can ensure the normal operation of the low-pressure conveying system.


Easy maintenance: low pressure transport industry special air compressor structure is simple, easy to maintain and maintain, can reduce maintenance costs and downtime.


Environmental protection and energy saving: The air compressor uses environmentally friendly materials and energy-saving technology, which can reduce energy consumption and reduce the impact on the environment.


Technical parameters

Model NO.

Exhaust capacity
m³/min 

Exhaust pressure
Mpa

Motor Power
KW 

Export

Power supply voltage

Weight       kg 

Dimensions mm 

Pipe diameter 

WBS-75A/W

18

0.4

75

DN80

380V/660V/6KV/10KV

3800

2600×1450×1800

17

0.5

WBS-90A/W

21.5

0.4

90

DN80

3900

2600×1450×1800

20

0.5

WBS-110A/W

26.5

0.4

110

DN100

4000

3000×1900×1950

25

0.5

WBS-132A/W

29.7

0.4

132

DN100

4100

3000×1900×1950

27.5

0.5

WBS-160A/W

39.6

0.4

160

DN100

5200

3600×2150×2150

36.8

0.5

WBS-185A/W

41.2

0.4

185

DN100

5300

3600×2150×2150

38.8

0.5


Besqo Marine offers a wide range of Auxiliary Machinery. For more information, leave message or send an email to sales@besqo.com.

评论

发表评论

此博客中的热门博文

What is a stern tube?

图片
  What is a stern tube? A  stern tube  is a tubular structure in a ship  shaft  used to support and protect the stern shaft. The task of the stern tube device is to support the stern shaft or propeller shaft and allow it to reliably vent out of the ship, while preventing a large amount of outboard water from leaking into the ship and oil leakage. The stern tube  is generally welded directly on the hull structure in the form of cast steel parts, and the bearings are pressed forward and back after processing or using the flexible pouring type of finished products, and then the propeller shaft is installed in the stern shaft tube. The operation and load bearing of the propeller shaft are borne by the stern shaft tube and its bearing. Stern tube is an important part of Marine propulsion system, its manufacturing process and material quality directly affect the performance and safety of the ship. Therefore, there are very high requirements for the manufacture an...
阅读全文

What Is Stern Shaft Covering Sleeve?

图片
  What Is Stern Shaft Covering Sleeve? The stern shaft covering sleeve  is a device that protects the stern shaft of a ship, usually installed at the tail of the ship, covering the stern  shaft . Its main function is to prevent the tail shaft from being corroded and worn by water and other substances, thus extending the service life of the tail shaft. The stern shaft covering sleeve  is usually made of a metal material, such as cast iron or cast steel, but can also be made of a wear-resistant, corrosion-resistant synthetic material. The inside of the stern shaft covering sleeve is usually filled with lubricating oil or preservatives to reduce the friction and wear of the stern shaft. At the same time, in order to better fix the cladding sleeve, fasteners such as bolts are usually used to fix it to the hull. The use of the covered sleeve of the stern shaft can effectively reduce the maintenance and replacement frequency of the stern shaft and improve the operating eff...
阅读全文

Cycloid Reducer Features

  Cycloid Reducer Features Cycloid reducer  has the following characteristics: Compact structure and small size:  due to the use of planetary transmission principle, the input shaft and output shaft are on the same axis line, so that the model can be as small as possible. ​ High transmission efficiency, low noise:  cycloidal needle tooth meshing multi-tooth contact, the contact stress is smaller than the straight tooth cylindrical gear, so the  bearing  life is longer when used. In addition, the tooth type is circular arc, which has less friction, less heat, high transmission efficiency and low noise than the point contact of the straight teeth. Simple maintenance:  cycloidal pinwheel reducer in the application can be configured within 40 degrees of any transmission Angle, for more than 40 degrees of transmission choose bipolar  transmission box . Long service life:  Due to the design of oil bath lubrication and seal cover design, the oil poo...
阅读全文