Marine News

  What Is A Diverter Valve? Diverter valve   is a special automatic valve. It directs (or diverts) the flow of liquids or gases in a ship from one source to another. Diverter valves are commonly used when two separate but equally important components must interact to obtain optimal performance. Diverter valves  are designed to handle extreme operating pressures, temperatures and corrosive environments. In the Marine industry, the flow of fluids (such as fuel oil, lubricating oil, water, etc.) from one pipe is divided into two or more pipes to meet the needs of different equipment or systems of the ship. There is a difference between diverter valves and delivery valves. Diverter valves are used to transfer water from one water source to another. Air gap diverters,  check valves  and  pressure balancing valves  can all be counted as one of the categories of diverter valves. Besqo Marine offers a wide range of  Marine V alves . For more information, ...

  What Is A Pressure Reducing Valve? Pressure reducing valves  help ships by reducing incoming high-pressure water to a lower and safer pressure. They are usually installed on the main water pipe next to the   stop valve . ​ As water flows through the valve, it passes through the diaphragm connected to the spring and reduces the pressure to the desired level as the water flows through the other side of the valve. The pressure reducing valve can also be set to any desired downstream pressure within its design limits. Once the valve is set up, the decompression will remain the same despite changes in supply pressure and system load. Pressure reducing valves  protect Marine pipes and pipe fittings from rupture due to high water pressure. High water pressure can put pressure on pipes, causing them to break or damage pipe fittings, which can lead to leaks. Besqo Marine offers a wide range of  Marine V alves . For more information,   leave message  or send a...

  What Is A Throttle Valve? ​ Marine flange  bronze  throttle valve  is used for Marine seawater, fresh water and oil pipeline system throttle valve, by changing the throttling section to control the flow. Its structure is relatively simple, easy to manufacture and maintenance, low cost. Because the flow of the  throttle valve  not only depends on the size of the throttle area, but also related to the pressure difference before and after the throttle, the stiffness of the valve is small, so it is only suitable for occasions where the load change of the actuator is small and the speed stability requirement is not high. For the throttle speed control system with large load change and high speed stability requirement, the throttle valve must be compensated to keep the pressure difference before and after the throttle valve unchanged, so as to achieve the flow stability. The throttle valve has no negative flow feedback function and cannot compensate for the spe...

  What Is A Stop Valve? Stop valve  is a valve used to stop the flow of liquid or gas in a system. It is usually installed at the end of a pipe or section of pipe. Shut-off valves are commonly used in household plumbing systems to turn off the water supply to fixtures such as sinks or toilets. As the two most common types of valves, what is the difference between  gate valves  and  stop valve ? Gate valves are used to control the flow of liquids and gases. They are commonly used in piping systems to regulate the flow of water or other fluids. On the other hand, stop valves are used to cut off the flow of liquids or gases. They are often used to quickly cut off the flow of material in an emergency. Globe valves can be used in high and low pressure applications and are relatively inexpensive. The globe valve has relatively few moving parts, and its maintenance costs are also relatively small. Besqo Marine offers a wide range of  Marine V alves . For more info...

  What Is A Storm Valve? The  storm valve  is a swing check valve with a closing device. The closing device is usually a hand wheel, but can also be actuated. The storm valve  can be installed in the sanitary plumbing system of the ship, the storm valve is usually installed in the sanitary plumbing system of the ship, which has a side outlet. They prevent seawater from entering the system during rough waves. It can also be installed on the deck and can be closed to prevent water from entering through openings such as vents, pipes or hatches. This helps prevent the vessel from taking on water and potentially causing damage or instability. The storm valve  has two openings where fluid flows in through the inlet and out through the outlet. The valve has a flap inside which is connected to a counterweight and a locking block. A locking block is a valve component controlled and operated by an external hand wheel or actuator. The purpose of the locking block is to hol...

  Quick Closing Valve Series ​ The  Quick  closing valve  is usually faster than the conventional valve in its closing speed, so it is called the  Quick  closing valve . The closing speed of the  quick closing valve  can be adjusted and controlled in a variety of ways, such as by changing the preload force of the spring, changing the fluid pressure, or changing the structure of the valve. In some cases, quick-closing valves can also be opened quickly to meet specific fluid control needs. In addition to the automatic closing function, the  quick closing valve  has some other features, such as good sealing performance, corrosion resistance and wear resistance. These characteristics make the quick-closing valve maintain better performance and longer service life during use. Besqo Marine offers a wide range of  Marine V alves . For more information,   leave message  or send an email to  sales@besqo.com .

  What Is A Fire Control Valve? Fire control valve  is a valve device used to regulate water flow in fire control system. It is usually used to control the import and export of water, ensure the supply of fire water sources, and can control the direction of water spray and water pressure during fire fighting. Fire control valves  are generally made of copper to provide a longer service life for pipes and containers. They generally not only have all the functions of ordinary SN type indoor hydrants, but also have the functions of free rotation of water outlet and decompression and pressure reduction. By rotating, to bring convenience to the installation. By reducing pressure and stabilizing, the pressure behind the initial bolt remains stable, ensuring safe and reliable use. At the same time, it can simplify the design and calculation of the fire fighting system, simplify the system, and make it an indispensable fire extinguishing device in the ideal high-rise building. Th...